TH series bucket elevator product knowledge

TH series bucket elevator is a kind of continuous vertical chain bucket lifting equipment for bulk materials, mainly used to enhance a variety of small powder, granular and small pieces of material non-abrasive or less abrasive, can be widely used in electricity, chemicals, metallurgy, building materials, light industry, food, mining and other industries. This type of bucket elevator have a large lifting capacity, stable operation, small footprint, easy operation, simple maintenance and so on. 1. Selection precautions TH series bucket elevator can enhance the material which temperature is generally below 250 ?, if the temperature is too high, there will be deformation of the hopper and shell, reducing equipment performance and service life; If at the bottom of the bucket elevator stack materials, cause the equipment can not run, this is most likely due to the lack of instant lifting capacity, therefore, the selection should be based on the maximum instantaneous lifting capacity to calculate. 2. Use precautions If the hopper have serious jitter phenomenon, and the chain ran to the side of the deviation serious, indicating that the level of main bearing installation is not good, should be re-adjusted; Should ensure that the feeding system is facing the hopper of bucket elevator, otherwise it will cause that some materials can not directly enter the hopper and fall to the bottom, and then make materials accumulation quickly at the bottom of the elevator, resulting the bottom sprocket can not be normal operation, at this point the feeding position should be adjusted; If the feed chute upper position is too high, and the feeding angle is very small, materials will pound into the hopper with very big speed, so that the hopper and traction chain will have a serious jitter, at this point should improve the feeding situation.