Φ2.2×18m Waste Residue Incinerator Project in Hubei
Project Overview:
Project Location: Hubei Yihua, China
Construction unit: Hubei Yihua Insurance Powder Factory
Product Name: Waste residue incineration
Production Capacity: 16t / h
Services: rotary kiln, two combustion chamber design, manufacture, installation and commissioning.
Project Description:
In this project, the rotary kiln is used to incinerate the waste residue. Since the waste residue generates dioxins during incineration, it is necessary to set up a secondary combustion chamber at the kiln end of the rotary kiln to eliminate dioxins in the flue gas.
Equipment Parameter:
1. Rotary kiln
Power: 380V / 50Hz / 3φ, motor energy level IE2, insulation class F, protection class IP54, explosion-proof grade dII BT.
Kiln specifications: Φ2200X18000 (mm)
Equipment slope: 3: 100Kiln main material: Q345R
Kiln head and kiln tail seal form: fish scales plus labyrinth
Support form: two support
Transmission: single-ended two-stage drive, pinion supported by a double bearing
Operating temperature of rotary kiln: 600℃ ~ 700℃
Lining requirements: 200mm mullite brick +100 insulation layer
2. Two combustion chamber
Two burning chamber material: Q345
Two combustion chamber operating temperature: 1100 ℃
Main Equipment:
|
No. |
Equipment Name |
Model |
Qty |
|
1 |
Rotary Kiln |
Φ2.2×18m |
1 Set |
|
2 |
Two combustion chamber |
adaptation |
1 Set |
