Introduction of Double Toothed Roller Crusher
Date:2021-03-19 16:43:43
Author:admin
Views:
156
The double-toothed roller crusher is actually one of the roller fragments, since the roller surface is a tooth, but also known as the double tooth roller crusher.
The double-toothed roller crusher is also known as the 2PGC tooth roller breaker, belonging to the type of the roller crusher, the roller surface shape can be divided into a crude raft roller, and the toothed type can be configured according to the user needs, and according to the size required by the material. Adjusting production, suitable for brittle and soft materials, dual-toothed roller crusher applies to ceramics sintering, coal, cement, silicate, glass, ceramics, etc., suitable for crushing of brittle materials below medium hardness, mainly for ore rough and smashing operation.
Although the double-toothed roller crusher is a device that is derived from the roller, the crusher of the double tooth roller and the light roller is still much different, such as:
1. The anti-noise effect of the roller crusher is better, and the structure is also environmentally friendly because it is equipped with dust proof board inside, the sealing performance is good, the dust does not float around.
2. The corresponding material hardness of the roller crusher is high in high school, such as ore, rock, better crusher than the general crusher, and simultaneous crusher in the grinding system can be in the production of grinding operations Ability is improved, because the material is released inside the material under extrusion of the roller crusher.
3. The double-toothed roller crusher is provided with a hydraulic automatic retracting device, which prevents the high hardness material to damage the tooth roll, and automatically remove the residual material, and does not cause clogging.
4. The double-toothed roller crusher has high work efficiency, more fragmentation, especially suitable for large coal plants.
5. The two tooth rolls of the double-toothed roller are moved in phase movement. When the material falls into the two tooth rollers, it is broken, setback, hitting and other crushing methods to break to the requirements.
6. It is easy to generate machineting phenomena, and the particle size of the duplex roller crusher is relatively uniform.
