How to select the site of lime rotary kiln?
Date:2019-11-21 16:36:13
Author:admin
Views:
339
The lime kiln is a kiln that burns lime at a high temperature and is used to calcine limestone to produce quicklime. It can directly calcine 10-50mm fine-grained limestone. In the active lime production line, this equipment is the main force, the mechanism of calcination is scientific, the thermal efficiency is very high, and used the sealing device. The processing and calcination process of lime is complete and has been popularized in many processing enterprises. The lime rotary kiln production line can not only make full use of high-quality limestone mine resources, but also meet the sustainable development policy of the lime industry. However, there are a number of issues to be aware of when constructing a lime kiln, especially in the previous site selection:
1. Principle of site selection for lime rotary kiln: safe and environmentally friendly, no pollution
The basic principle of lime calcination rotary kiln is summarized in one sentence, which is, calcium carbonate in limestone is decomposed into quicklime of calcium oxide and carbon dioxide by high temperature.
There will be some pollution in this process, so we should choose the appropriate lime rotary kiln construction address based on the principle of energy saving, environmental protection and pollution, and reduce pollution. The location of the lime kiln must be based on the principles of environmental protection, safe fire protection and energy conservation and pollution.
2. Project site selection conditions
(1) The construction of the lime rotary kiln is built in a place with sufficient power supply, convenient transportation and good construction conditions.
(2) The selected area is rich in limestone resources, which can be supplied by the company to provide sufficient raw material supply.
(3) The location of the project should be flat, the terrain should be regular, and the power, transportation, water supply and drainage facilities should be complete.
(4) The construction conditions of the site should be convenient. The main materials required for the project, such as sand, cement and steel, can be purchased from the surrounding area. The transportation is convenient and not remote.
(5) The lime rotary kiln should be built away from residential areas and not built above the water flow in the residential area and downwind.
3. Installation requirements for lime rotary kiln
Before the installation of the lime kiln, the relevant technical personnel should understand the construction of the equipment and the drawings related to the installation, and do a good job of pre-installation. After the construction site is surveyed, the installation plan is listed, and then installed in order. The installation method and installation tools in the installation must be carried out in a planned manner.
