Rotary kiln used in the ceramsite production plant

Ceramsite rotary kiln is a special rotary kiln for calcined ceramsite raw materials, it is a special equipment for ceramsite. Ceramsite rotary kiln is widely used in sludge, clay, yellow mud, river bottom silt, fly ash, shale, slag, and other materials ceramsite calcination and production. It is also an important equipment in ceramsite production line. It has the characteristics of high unit volume, long furnace life, high operation rate, stable operation, high heat transfer efficiency and low heat loss. It is an ideal ceramic calcination equipment. Ceramsite rotary kiln works similar to other rotary kiln, kiln body and the level was a certain slope, the entire kiln body by the support roller device, and have a runner gear device to control the kiln up and down. In addition to the transmission part of the main drive set up, but also set to ensure that the main transmission power supply can still make the kiln slow rotation, to prevent deformation of the kiln auxiliary transmission. Kiln head shell seal, rotary kiln tail with axial contact seal to ensure the reliability of the seal. Ceramsite kiln on the one hand is a burning equipment, pulverized coal combustion in the kiln to produce heat; but also is a heat transfer equipment, raw materials to absorb the heat of the gas calcined. In addition there are conveying equipment, the raw material from the feed end to the discharge end. The fuel combustion, heat transfer and raw material movement between the three must be reasonable, in order to enable the fuel combustion of heat generated in the raw materials through the ceramsite rotary kiln time to the raw materials, to achieve high yield, high quality, low consumption purposes. Ceramsite rotary kiln equipment features: 1. Ceramsite rotary kiln has the advantages of simple structure, high unit volume, long service life, high operation rate, stable operation, high heat transfer efficiency, low heat consumption. 2. Ceramics rotary kiln is the most convenient place for temperature control, over-temperature alarm, secondary air intake and waste heat utilization, long life kiln lining. 3. Ceramic quality is also very good, advanced kiln seal technology and devices, stable operation, high yield and other significant features.